The effect of slitting machine on corrugated board

The effect of slitting machine on corrugated board

Summary

The role of slitting machine

Why does the paper dividing and pressing machine fracturing corrugated cardboard
        The paper-separating and pressing machine includes a paper-separating knife shaft and a line-pressing shaft. Four-axis and six-axis are more common, and the width between the knife shafts can be adjusted freely, thus realizing the production requirements of different specifications of cartons.
Why does the paper dividing and pressing machine fracturing corrugated cardboard
The reasons are mostly as follows:
1. The equipment adjustment is unreasonable, and the gap of the crimping wheel is too small;
2. The quality of the lining of the cardboard is poor or the basis weight is too low;
3. The cardboard matching paper is unreasonable. For example, the quality of the lining paper is relatively poor and the corrugation uses high-strength corrugation. In layman's terms, the corrugation is too hard.
4. The moisture content of the cardboard is too low.
Solution to fracturing corrugated cardboard by paper dividing and pressing machine
If you can't change the paper distribution, you can adjust the equipment first, and then you can't start from adjusting the moisture content of the cardboard, using the paper dividing line machine with pre-pressing line to produce, etc.